These storeWALL™ tongue and groove panels measure 3/4-inches thick, 15-inches high and come in either 4-feet or 8 feet wide lengths.  Available colors are:  Global Pine, Rustic Cedar, Weathered Grey, Dover White and Brite White

4-Foot Panels are sold (6) panels per carton.
8-Foot Panels are sold (4) panels per carton and are available by special order only.

Give your storeWALL™ panels that "finished look" with Ucaps.  Ucaps fit over the edges of the storeWALL™ panels for a neat, professional look.  Ucaps are available in Global Pine, Rustic Cedar, Weathered Grey, Brite White,Dover White and Black.

Ucaps are shipped (4) pieces per pack, and each piece measures 8-feet 2-inches in length

Do you have storage products you would like to firmly lock onto a storeWALL™ panel?  These two-piece brackets allow you to do just that. The back part hooks into the storeWALL™ as normal, and the front part bolts to your item, then slides down over the back piece forming a solid connection to the wall.

Packed (100) Hang Ups per box, and are made from injection molded resin, and are used to hang the panels on the wall supported by the 'wedge' shaped slots in the back of each panel. 

Normally, Hang Ups used in three of the five slots is sufficient with 16" spaced wall studs, but all five slots can be used for maximum load capacity. Note that each carton of storeWALL™ Panels contains two Hang Ups per panel.

Packed (100) screws per box, these screws have painted heads which have been custom colored to match the storeWALL™ panels. The screws are #6, 1-5/8", bugle headed drywall screws with zinc plating and a baked-on painted finish in the colors of Global Pine, Rustic Cedar, Weathered Grey, Brite White and Dover White.

If you use a screw in every slot (five slots per panel), and have studs spaced at 16" intervals, you'll need (4) screws per square foot of panel or (20) screws per 4' panel. This is the maximum you'll need, many applications don't require a screw in every slot.